Spanish Brick Molds For Walkway

Foreign Spanish custom with a blind spot brick molds for cement, plastic raw materials using a better texture of the new ABS raw materials, pouring the finished bricks surface is more smooth and perfect. The small round dots design for urban walking road and guide blind road laying more professional, non-slip, guide the obvious advantages.

The use of such brick molds for cement to produce concrete bricks process as follows:

First, equipment and raw materials to prepare

First need to prepare is the raw materials and equipment, basically at the same time general use of cement concrete color brick molds used in conventional machinery, such as vibration platform, mixer, small shovel and so on. Focus on color molding raw materials, that is need to add the pigment, conventional iron oxide red, iron oxide yellow and Phthalocyanine green and other powder.

Second, the specific construction process

1. The first is the ratio of raw materials, cement 100 pounds with pigment 10 pounds,200 pounds of gravel, stir into the mixer evenly, in the injection of about 5 pounds of brightener and 25 pounds of water in the mixed liquid thoroughly stirred, about not thin or too thick to pouring in Spanish brick molds.

2. Note that the first injection of plastic Spanish brick molds within the fabric layer is about 0.5-1 cm thickness, the use of vibration platform processing vibration flat, about 40 minutes after the injection into the base layer.

3. At the end of the material in the color brick plastic box must be flat height,otherwise it is easy to cause the brick is not smooth, for the pavement laying in terms of difficulty, not easy to construction. Note: the maintenance process should not be placed in the outdoor, such as the sunshine and raining,Best way is placement at indoor storage and than remove the brick molds about 4 days.