LCMOLDS Commercial Concrete Planter Molds Super Large
$166.80 – $336.40
- In stock, Ready to Ship.
- Material: Plastic ABS
- Color: Ivory
- Size:
- Diameter 30CM x Height 27CM / 12″ x H10.6″
- Diameter 60CM x Height 45CM / 24″ x H18″
- Reusable: ≥ 50 Times
- Package Contents:
- 1 x set Plastic Concrete Flower Pot Mold
- 1 x bag Plastic Buckles
Included: main products, parts, Instructions for use, gifts(If have any)
Worldwide Free Shipping. We ship with USPS, FEDEX, CANADA POST, AU POST, CHINA POST. Click to vist our Shipping Policy.
All products can be returned within 90 days after receiving it. To learn more please visit Return & Refund Policy.
-RELATED PRODUCTS-
Related products
-
-
-
-
Sale!
2 reviews for LCMOLDS Commercial Concrete Planter Molds Super Large
-
GIANT
The planter was really big and very heavy when it was finished, so I placed it directly on the ground. To avoid wasting more time trying to make it: 1. Be sure to fasten all the plastic buckles tightly. If you feel there is still looseness, please wrap some rope or tape around the outside of the mold. 2. Before pouring concrete, be sure to apply a release agent, This will prevent the corners or surfaces of the flower pot from being damaged.
December 26, 2023Verified Purchase -
Spuer large flower pot
I’ve been looking for an oversized plant pot mold and finally found it. The product is ideal, the casing is very hard and thick, very solid. It also comes with a plastic lock for easy prefabrication and demoulding.If you bought this mold like me, here is my suggestion:The proportion of concrete is about: sand 30%, cement 30%, water 30%, pigment powder 5-10fore prefabrication, remember to apply organic substances such as soapy water or waste gasoline to the inner wall of the mold, which can help you to release the mold smoothly without damaging the finished concrete flowerpot structure.GOOD LUCK!
February 15, 2022Verified Purchase
HOW TO PRECAST BY MOLDS?
CHECK BELOW DETAILS.
VIDEO FOR EASY PRECASTING
- WHAT MOLDS WE SUPPLY-
MATERIALS OF CONCRETE MOLDS
Base on injection process, we focus on plastic ABS molds & plastic Polypropelene molds more than 15 years. CATALOG OF CONCRETE MOLDS: Commercial concrete planter molds, Roman column molds, Breeze block molds, Baluster molds, DIY walk maker forms and other Garden decor molds etc.
Silicone molds for concrete have always been in a very high position among DIY enthusiasts. Inexpensive, easy to make, are its main advantages. Such as: Small planter molds, Candle molds, Soap molds, Skull molds etc.
Normally, The latex molds only for custom service, because it is the most cost-effective manufacturing process for customizing a small order of molds. Of course, silicone molds can also do this, The choice of latex or silicone ultimately depends on the customization needs of customers. The most common is to use in the production of concrete / plaster sculptures.
In the true sense, the size of industrial-grade concrete molds is very large, which has a great test for the durability of mold materials. Therefore, steel and fiberglass are the best choices. The disadvantage is that they can only be applied to engineering projects with relatively simple shapes. Such as utility poles, sewer wells, prefabrication of culverts, etc. At present, LCMOLDS accepted customized services only.
- PRECAST & DEMOLDING-
FAST STEP GUIDES FOR PROCESS
Prefabricated raw materials (concrete, silica gel, plaster, etc.), molds, release agent(for Plastic Molds only),gloves, goggles, scales, mixing tools, support, operating instructions, etc.
These will be better to help you complete the project.
Usually we often talk that the mold release agent is mainly used in plastic(ABS, PP) molds. Before pouring, it should be applied on the inner wall of the mold first. The advantage is that it is convenient to demould after the prefabrication is completed.
Molds made of other materials, such as silicone molds, are not suitable.
Concrete needs to be mixed, so you must control the ratio of various raw materials. During the pouring process, the construction should be done slowly and at a constant speed. When necessary, a vibrating table or a vibrating rod is required to remove the air bubbles in the concrete. After completion, wait for the concrete to solidify and form, depending on the temperature or environment, ordinary concrete takes 4-12 hours.
For the demoulding of large-sized concrete blocks, you can use a rubber hammer to lightly hit all angles of the mold, and the finished product will fall off naturally-provided that the mold release agent has been applied to the inner wall of the mould.
After the finished concrete is demoulded, its strength is not fully hardened, so it must be placed in a ventilated place to dry naturally (it takes about 12-24 hours). Note: Prohibit sun exposure and rain.
THERE ARE BETTER IDEAS?
If have more perfect DIY molds or know how to easy concrete precasting or molding release, please give us more of your ideas, maybe, you love to help more families.
Frequently Asked Questions
FAQ about ordering, Shipping. Click to visit.
NEED HELP?
Anything need help, please talk with online CHAT or email us.
- Reviews -
2 reviews for LCMOLDS Commercial Concrete Planter Molds Super Large
-
GIANT
The planter was really big and very heavy when it was finished, so I placed it directly on the ground. To avoid wasting more time trying to make it: 1. Be sure to fasten all the plastic buckles tightly. If you feel there is still looseness, please wrap some rope or tape around the outside of the mold. 2. Before pouring concrete, be sure to apply a release agent, This will prevent the corners or surfaces of the flower pot from being damaged.
December 26, 2023Verified Purchase -
Spuer large flower pot
I’ve been looking for an oversized plant pot mold and finally found it. The product is ideal, the casing is very hard and thick, very solid. It also comes with a plastic lock for easy prefabrication and demoulding.If you bought this mold like me, here is my suggestion:The proportion of concrete is about: sand 30%, cement 30%, water 30%, pigment powder 5-10fore prefabrication, remember to apply organic substances such as soapy water or waste gasoline to the inner wall of the mold, which can help you to release the mold smoothly without damaging the finished concrete flowerpot structure.GOOD LUCK!
February 15, 2022Verified Purchase
Leave feedback about this